Tel:905-799-7555
E-Mail: sales@canadapneumatics.com
FAX: 905-799-3332
MPG UNION STRAIGHT Nickle Plated Brass Push in Fittings
MDSC- SPEED CONTROLLER Nickle Plated Brass Push in Fittings
PMF Bulkhead Female Connector PLASTIC PUSH IN FITTING
PWT MALE Y PLASTIC PUSH IN FITTING
PST MALE RUN TEE PLASTIC PUSH IN FITTING
PT MALE TEE PLASTIC PUSH IN FITTINGS
MPLGJ PLUG IN REDUCER ELBOW Nickle Plated Brass Push in Fittings
MPZA Union Cross Nickel Plated Brass Push in Fittings
MPE UNION TEE Nickle Plated Brass Push in Fittings
MPY UNION Y Nickle Plated Brass Push in Fittings
MPV UNION ELBOW Nickle Plated Brass Push in Fittings
MPX MALE Y Nickle Plated Brass Push in Fittings
Flame-Resistant Hose & Anti-Static Hose
PUH 8*5 Anti-Spark Hose
MPH-U- MALE BANJO Universal thread brass push in fittings
MDSC-U SPEED CONTROLLER Universal thread Nickle Plated Brass Push in Fittings
MSC-U SPEED CONTROLLER Universal thread Nickle Plated Brass Push in Fittings
MPX-U- MALE Y Universal thread Nickle Plated Brass Push in Fittings
MPD-U- MALE RUN TEE Universal thread Nickle Plated Brass Push in Fittings
MPB-U- MALE TEE Universal thread Nickle Plated Brass Push in Fittings
MPLL-U- EXTENDED MALE ELBOW Universal thread Nickle Plated Brass Push in Fittings
MPL-U- MALE ELBOW Universal thread Nickle Plated Brass Push in Fittings
MPC-U- MALE STRAIGHT Universal thread brass push in fittings
SPM UNION BULKHEAD --stainless steel push-in fittings
SPE UNION ELBOW --stainless steel push-in fittings
SPV UNION ELBOW --stainless steel push-in fittings
SPU UNION STRAIGHT --stainless steel push-in fittings
SPMF BULKHEAD FEMALE --stainless steel push-in fittings
SPE MALE TEE --stainless steel push-in fittings
SPL MALE ELBOW --stainless steel push-in fittings
SPCF FEMALE STRAIGHT --stainless steel push-in fittings
SPOC ROUND MALE STRAIGHT --stainless steel push-in fittings
SPC MALE STRAIGHT --stainless steel push-in fittings
KPZA- S304/316 -Misting cooling system fitting ,Spray Misting Fittings
KPE- S304/316 -Misting cooling system fitting ,Spray Misting Fittings
KPC- S304/316 -Misting cooling system fitting ,Spray Misting Fittings
KPL- S304/316 -Misting cooling system fitting ,Spray Misting Fittings
KPUD- S304/316 -Misting cooling system fitting ,Spray Misting Fittings
KPUC (1h -2h ) - 10/24UNC thread S304/316 -Misting cooling system fitting ,Spray Misting Fittings
Nozzle 01---006 Misting Cooling System Fittings Nozzle
MPC MALE STRAIGHT -Misting cooling system fitting ,Spray Misting Fittings
MPCF FEMALE STRAIGHT -Misting cooling system fitting ,Spray Misting Fittings
MPUD-(without hole) Misting cooling system fitting ,Spray Misting Fittings
MPUD-SH (side hole) Misting cooling system fitting ,Spray Misting Fittings
MPZA Union Cross -Misting cooling system fitting ,Spray Misting Fittings
MPUT --Misting cooling system fitting ,Spray Misting Fittings
MPUL -(Without hole ) Misting cooling system fitting ,Spray Misting Fittings
MPUC-DH(Double 180 ℃ hole ) -Misting cooling system fitting ,Spray Misting Fittings
MPUC -Misting cooling system fitting ,Spray Misting Fittings
MPUC-SH -Misting cooling system fitting ,Spray Misting Fittings
PPFSB-B - BIG FLOW RESTRICTOR -Water fitting Plumbing and Heating Fittings
PPDMF- THREAD PRESSURE TOW WAY SPITTLE Water fitting Plumbing and Heating Fittings
PPDY -QUICK LOW PRESSURE TWO WAY SPITTLE -Water fitting Plumbing and Heating Fittings
PPIV- CHECK VALVES --Water fitting Plumbing and Heating Fittings
PPLVF-FEMALE VALVES -Water fitting Plumbing and Heating Fittings
PPUVF- MALE VALVES-Water fitting Plumbing and Heating Fittings
PPUV- UNION VALVES -Water fitting Plumbing and Heating Fittings
PPB-G- TEE OBVERSE O-RING -Water fitting Plumbing and Heating Fittings
PPDC -PROFILE STEM -Water fitting Plumbing and Heating Fittings
PPL-G - ELBOW O-RING Water fitting Plumbing and Heating Fittings
PPEC- OBVERSE STEM --Water fitting Plumbing and Heating Fittings
PPU- UNION CONNECTOR -Water fitting Plumbing and Heating Fittings
PPLC- TUBE ELBOW UNION - Water fitting Plumbing and Heating Fittings
PPLF- FEMALE ELBOW ADAPTER Water fitting Plumbing and Heating Fittings
PPY -TWO WAY DIVIDER Water fitting Plumbing and Heating Fittings
PPM- BULKHEAD UNION Water fitting Plumbing and Heating Fittings
PPV- ELBOW UNION Water fitting Plumbing and Heating Fittings
PPE - TEE CONNECTOR Water fitting Plumbing and Heating Fittings
PPD -MALE TEE OBVERSE Water fitting Plumbing and Heating Fittings
PPB-MALE TEE OBVERSE Water fitting Plumbing and Heating Fittings
PPL- MALE EBLOW THREAD Water fitting Plumbing and Heating Fittings
PPCF - FEMALE ADAPTER Water fitting Plumbing and Heating Fittings
PPC MALE CONNECTOR THREAD - WATER FITTING PLUMBING AND HEATING FITTINGS
POC ROUND MALE STRAIGHT - PUSH IN FITTINGS
KKP Series Quick Exhaust Valve Product Features 1. Quick Exhaust Valve allowing the air from the cylinder to be exhaust immediately . 2. Quick Exhaust Valve is mounted on the cylinder port and maybe fitted with a muffler.
ST Series Shuttle Valve Product Features 1.Usually it is used high and low pressure output and automatic and manual equipments. 2.These valves normally work together with the controlling valves the pneumatic systems. 3.It gives supportive help the controlling valves, so that the complete controlling system, can be finished very well.
HSV Series Hand Sliding Valve Product Features 2/3 Hand Sliding valve can be used switch of air source . When air source is switch off ,the remained air in system can be released.
MSV Series Mechanical Valve Product Features 1. Different colors are optional . 2.Controlled by mechanical force. 3.Various buttons are available.
AFC/BFC Series Air Source Treatment Unit (FR.L) The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
AC/BC Series Air Filter Combination (F.R.L) The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HARE2000-5000 Series Air Regulator This product has been improved in installation of pressure gauge and overflow structure. Making the products more convenient , and more sensitive overflow
HAWE2000-5000 Series Filter Regulator This product has been improved in installation of pressure gauge and overflow structure. Making the products more convenient , and more sensitive overflow
HACE2010-5010 Series Air Filter Combination (Two Elements) This product has been improved in installation of pressure gauge and overflow structure. Making the products more convenient , and more sensitive overflow
HACE2000-5000 Series Air Filter Combination (Three Elements) This product has been improved in installation of pressure gauge and overflow structure. Making the products more convenient ,and more sensitive overflow
HNAW2000-5000 Series Filter Regulator The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HNAL2000-5000 Series Air Lubricator The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
CPI series solenoid valves are popular with customers by the compact design and the such many kinds, the thread size range from 1/8’’ to 2’’. Suitable for various working pressure, different temperature and many kinds of medium. 2/2, 3/2, normally closed and normally open, pipe connection and flange connection, brass materials and stainless steel materials, direct acting type and pilot type
PU225 Series Solenoid Valve PU series solenoid valves have two types, PU220 direct acting type and PU225 pilot type. Direct acting type range from 1/8’’ to 1’’, the timer is available for 3/8’’ to 1’’, autodrain control, control frequency from 1 to 45 min, drain the water within 1 to 10 senconds. Pilot type range from 3/8’’ to 2’’, PU series valves are widely used in the air control system and water control system.
MSC Speed Controller Nickel Plated Brass Push in Fittings
MPM UNION BULKHEAD Nickel Plated Brass Push in Fittings
MPGJ Plug-in Union Reducer Nickle Plated Brass Push in Fittings
MPH Male Swivel Banjo Nickel Plated Brass Push in Fittings
MPU Union Straight Nickel Plated Brass Push in Fittings
MPMF Bulkhead Straight Nickel Plated Brass Push in Fittings
MPD MALE RUN TEE Nickel Plated Brass Push in Fittings
MPB MALE TEE Nickel Plated Brass Push in Fittings
MPC MALE STRAIGHT Nickel Plated Brass Push in Fittings
QUICK COUPLING --USA SERIES COUPLER--U38 Series-Barb Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--U38 Series-Male Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--U38 Series-Female Socket 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UA2-Series-Barb Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UA2-Series-Male Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UA2-Series-Female Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UA1-Series-Barb Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UA1-Series-Male Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UA1-Series-Female Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors
QUICK COUPLING --USA SERIES COUPLER--UM Series-Barb Plug Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UM Series-Male Plug Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UM Series-Famale Plug Features: 1.We make USA Universal coupler,Milton coupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism.
QUICK COUPLING --USA SERIES COUPLER--UMC Series-Barb Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UMC Series-Male Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UMC-Series-Female Socket
QUICK COUPLING --USA SERIES COUPLER--UM2-Series-Barb Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UM2 Series-Male Socket Features: 1.We make USA Universal coupler,Miltoncoupler,ARO coupler,Truflate coupler etc. 2.Target market:North America ,South America. 3:Material: Steel,Brass,Stainless Steel. 4.Various surface coating: Chrome plated,Nickel plated,Copper color etc. 5.Proven and positive connection using ball-locking mechanism. 6:Used for air tools and air compressors.
QUICK COUPLING --USA SERIES COUPLER--UM2 Series-Female Socket Specifications: 1:Max.Working Pressure:150 psi. 2:Temperature:-40°fto225°f(-20℃to107℃). 3:Air Flow:35 SCFM at 100 Psi inlet with 10 psi pressure drop.
QUICK COUPLING --USA SERIES COUPLER--UM1-Series-Barb Specifications: 1:Max.Working Pressure:150 psi. 2:Temperature:-40°fto225°f(-20℃to107℃). 3:Air Flow:35 SCFM at 100 Psi inlet with 10 psi pressure drop.
Quick Coupling --USA SERIES COUPLER Specifications: 1:Max.Working Pressure:150 psi. 2:Temperature:-40°fto225°f(-20℃to107℃). 3:Air Flow:35 SCFM at 100 Psi inlet with 10 psi pressure drop.
Specifications: 1:Max.Working Pressure:150 psi. 2:Temperature:-40°fto225°f(-20℃to107℃). 3:Air Flow:35 SCFM at 100 Psi inlet with 10 psi pressure drop.
PU series solenoid valves have two types, PU220 direct acting type and PU225 pilot type. Direct acting type range from 1/8’’ to 1’’, the timer is available for 3/8’’ to 1’’, autodrain control, control frequency from 1 to 45 min, drain the water within 1 to 10 senconds. Pilot type range from 3/8’’ to 2’’, PU series valves are widely used in the air control system and water control system.
Normal close,available body:brass,SS316 Multiple seals are available for different medium Wide size range from 1/8" to 2",with both thread and flange connection Diaphragm pilot solenoid valve,with lower working pressure
VX series solenoi valves, range from 1/8’’ to 1/2’’, equiped with flying leads type coil, zero-pressure start, normally closed, withstand the pressure up to 10 bar. VX series solenoid valves are widely used in the air control system and water control system. Also can be suitable for steam if change the seal materials.
2V series solenoid valve have two working type, direct acting type( from 1/8’’ to 1/4’’) and pilot solenoid valve(from 3/8’’ to 1’’). Compact design, cheap price, low energy consumption, up to 10 bar, withstand the high temperature of 130 centidegree equiped with VITON sealing. 2V series solenoid valve is widely used in the control of air system.
2P series solenoid valve is the direct acting type with normally closed, oriffice is 2.5mm, body materials is engineering plastic, small dimension, wide application. With many year experience of the technology, CPI can meet the customers’ requirements in the processing of valve body and coil, sealing materials etc. 2P series valve have many advantages, such as competitive price, stable quality and long life.
2S series stainless steel solenoid valve, thread size range from 1/8’’ to 2’’, body materials is S.S.316, good anticorrosive ability, sealing materials have NBR, EPDM and VITON, high temperature type is available. Din connector and flying leads types, anti-explosion and anti-water type coil are available. Suitalbe for the medium of air, water, oil and gas. Because of the high stable performance, 2S valve is well known in this field.
2L series 2/2 pilot steam solenoid valve, thread size range from 3/8’’ to 2’’, withstand the high temperature of 180 centidegree, because of the control of steam, so called steam valve. Accordingly,,the working pressure is enhanced up to 15 bar, the oriffice is also maken bigger to increase the velocity. With the stable performance, 2L valve is widely used in the field of steam control all over the world.
2W series direct acting solenoid valve with big oriffice type, thread size range from 3/8’’ to 2’’, oriffice size range from 16mm to 50mm, with thread pipe connection and flange connection types. Din connector type and flying leads type, anti-explosion and anti-water coil are available. The initial state for normally closed, normally open only for oriffice with 16mm, 20mm and 25mm. With the stable function and extensive application, 2W valve is popular with customers.
2W series small oriffice solenoid valve, also known zero-pressure solenoid valve, the initial state for normally closed, normally open only available for below 3/8’’, thread size range from 1/8’’ to 3/8’’, Din connector type and flying leads type, anti-explosion and anti-water coil are available. With the stalbe quality and wide application, 2W valve is popular with customers, especially in the water treatment system, the 2W valve is used widely.
CPI series angle valve, stainless steel body materials, equiped with plastic actuator, SS316 and SS304 are available, single acting normally closed and double acting normally open, actuator size range from 40mm to 100mm, port size range from 3/8’’ to 2’’. Max temperature of the medium is up to 180 centidegree, CPI series angle valve is very popular with the competitive price.
CPI series angle valve, stainless steel body materials, equiped with plastic actuator, SS316 and SS304 are available, single acting normally closed and double acting normally open, actuator size range from 40mm to 100mm, port size range from 3/8’’ to 2’’. Max temperature of the medium is up to 180 centidegree, CPI series angle valve is very popular with the competitive price.
CPI series pulse valve can be made up to 3’’, widely used in the electrical power, chemical, metallurgy, coloured metal, tobacco and other industries which need the dust cleaning system. Long life for 1 million blow and spray, CPI series pulse valve have the strong competition advantages in excellent quality, competitive price and stable life time.
CPIF Series 2/2 Pulse Valve (Normal Close) can be made up to 3’’, widely used in the electrical power, chemical, metallurgy, coloured metal, tobacco and other industries which need the dust cleaning system. Long life for 1 million blow and spray, CPI series pulse valve have the strong competition advantages in excellent quality, competitive price and stable life time
G/Q series mini solenoid valves are popular with customers on the delicate shape and rational design, mainly used in the control system of air, water, ink, coffee and other non-corrosive fluid, 2/2 and 3/2, normally open and normally closed, thread size range from M5 to 1/4’’, oriffice range from 1.2mm to 5mm, temperature range from 0 centidegree to 120 centidegree.
SLC series direct acting water valves are mainly used in the field of water fountain, washing machine, and other drinking system etc. Food level standard products, pipe connection and thread type connection, suitable for different requirements. Oriffice have 2.5mm, 8mm and 9mm, thread sieze range from 1/8’’ to 1/4’’, The body materials can be made of PP and Nylon, depending on the differernt requirements.
SLG5404 series high pressure solenoid valve, max working pressure: 75 bar, equiped with the PTFE sealing, the max temperature is up to 150 centidegree. Oriffice have three options, 12mm, 20mm and 25mm, port size have 1/2’’, 3/4’’ and 1’’, Din connector type and flying leads type.
CPI series solenoid valves are popular with customers by the compact design and the such many kinds, the thread size range from 1/8’’ to 2’’. Suitable for various working pressure, different temperature and many kinds of medium. 2/2, 3/2, normally closed and normally open, pipe connection and flange connection, brass materials and stainless steel materials, direct acting type and pilot type.
4V Series Solenoid Valve Product Features * Stable life cycle, guaranteed 12,000,000 times. *Manifolds are available for all sizes. *Various voltages and working styles are available. * Different surface treatment , BSPP, BSPT and NPT thread are available.
3V Series Solenoid Valve Product Features 1. Stable life cycle ,guaranteed 12,000,0000 times. 2. Various voltage and working style are available. 3. Different surface treatment ,BSPP,BSPT and NPT thread are available. 4. Manifolds are available for all types and sizes.
3V1 Series Solenoid Valve Product Features 1.Stable life cycle ,guaranteed 12,000,0000 times. 2.Various voltage and working style are available. 3.Different surface treatment ,BSPP,BSPT and NPT thread are available.
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
SCF INLINE SPEED CONTROLLER
SC Speed Controllers PLASTIC PUSH IN FITTING
Speed Controllers Application -Valve used for controlling the operation speed of a driving device. -Used for movement of machines such as cylinder ,pneumatic finger ,etc. Feature -Precisely permit the optimal rate of airflow for the smooth cylinder movement of driving devices. -The Compact and light body permits use in confined space . -Uni-directional airflow is available for either exhaust or inlet flow control methods.
MPCF FEMALE STRAIGHT -Nickel Plated Brass Push-In-Fittings
MPLL EXTENDED MALE ELBOW Nickel Plated Brass Push in Fittings
MPL Male Swivel Elbow Nickel Plated Brass Push in Fittings
MPOC - ROUND MALE STRAIGHT Nickel Plated Brass Push in Fittings
HNAF2000-5000 Series Air Filter The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HNAC2010-5010 Series Air Filter Combination (Three Elements) The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HNAC2000-5000 Series Air Filter Combination (Three Elements) The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HAW2000-5000 Series Filter Regulator The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HAL2000-5000 Series Air Lubricator The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
HAF2000-5000 Series Air Filter The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple,
HAC2010-5010 Series Air Filter Combination (Two Elements) The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family,It has the most complete specifications, big flow rate. And the installation and maintenance is very simple,
The port size of A Series Air Treatment Unit is from M5 to 1 ". In the current product family, It has the most complete specifications, big flow rate. And the installation and maintenance is very simple, which coupled with manual and automatic drainage drainage-type type (only in 2000 or more size selection). It is our CPI one of the best-selling line of products.
Used to five-branch lines. Tube sizes are different.
PZA Union Cross PLASTIC PUSH IN FITTING
PMM Bulkhead Union PLASTIC PUSH IN FITTING
Use to plug unused push in fittings.
Use to four-branch line from push in fitting. Tube size and Stem size are same.
Connection of two push in fittings that are same Tube ΦD.
Use to branch line in the same direction from Push in fittings. Tube size and Stem size are different.
Use to branch line in the same direction from Push in fittings. Tube size and Stem size are equal.
Connection of tubing at a 90° angle to a push-in fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges.
PGJ Plug-in Reducer PLASTIC PUSH IN FITTING
PW Union Y Reducer PLASTIC PUSH IN FITTING
PY Union Y PLASTIC PUSH IN FITTING
Use to connect tubes with size down in both 90° directions.
PGT Union Tee Reducer PLASTIC PUSH IN FITTING
PUT Union Tee PLASTIC PUSH IN FITTING
Connection at a 90° angle of two tubes of different tube ΦD.
PUL Union Elbow PLASTIC PUSH IN FITTING
PG Union Straight Reducer PLASTIC PUSH IN FITTING
PUC Union Straight PLASTIC PUSH IN FITTING
Use to branch line in the same direction or at the right angles from male or female thread. Multiplex connection possible.
Connection of tubing at a 90° angle to a female threaded port. Tightened on the top of the fitting by use of a flat wrench or a socket wrench.
Use to three-branch lines at right angles from female thread.
PCF Female Connector PLASTIC PUSH IN FITTING
Connection of two tubes through a panel, changing by 90° in a tubing fetching direction.
PLF Female Elbow PLASTIC PUSH IN FITTING
PLL Extended Male Elbow PLASTIC PUSH IN FITTING
PL Male Elbow PLASTIC PUSH IN FITTING
PC MALE STRAIGHT PLASTIC PUSH IN FITTING
PE TUBE Useful is very wide area, and the tubing coil is verylight,flexible and durable, Room-saveing and easy use.
Polyamide TUBE(PA6,PA12) Features: •Superior mechanical strength and excellent abrasive resistance. Oil resistance.Superior cold resistance. •High precision of inside and outside dia sizes controllable. suitable for various kinds of fittings. •High resistance to hydrocarbons oils and chemical products.
Polyethylene Tube Application -Used for industrial robots and pneumatic piping. -Used for various applications by functions. Feature -Higher flexibility than nylon(PA) helps working achievement. -Higher flexibility in low temperature. PU(Polyurethane), PA(Nylon) and PE(Polyethylene) tubings have an excellent performance of resistance against high-pressure, vibration, corrosion and bending. Multiple colors for selection.
HV Series Hand-Switching Valve Product Features 1.Different types are available. 2.Size are from 1/4" to 1/2" . 3.With longer time the better performance.
4F Series Foot Valve Product Features 1.Strong design and work in harsh environment. 2.Various types are available.
4R/3R Series Hand-Draw Valve Product Features 1.Manual operated. 2.Various working style are available. 3.Different color are optional. 4. Different surface treatment , BSPP, BSPT and NPT thread are available.
4H Series Hand-Pull Valve Product Features 1.Manual operated. 2.Various working style are available. 3.Different color are optional. 4. Different surface treatment , BSPP, BSPT and NPT thread are available.
4A Series Air Control Valve Product Features * Stable life cycle, guaranteed 12,000,000 times. *Manifolds are available for all sizes. *Various voltages and working styles are available. * Different surface treatment , BSPP, BSPT and NPT thread are available.
3A Series Air Control Valve Product Features * Stable life cycle, guaranteed 12,000,000 times. *Manifolds are available for all sizes. *Various voltages and working styles are available. * Different surface treatment , BSPP, BSPT and NPT thread are available.
4M Series NAMUR Solenoid Valve Product Features * Stable life cycle, guaranteed 12,000,000 times. *Manifolds are available for all sizes. *Various voltages and working styles are available. * Different surface treatment , BSPP, BSPT and NPT thread are available.